Paste this into Claude Code (VS Code panel, Adom editor, or terminal) to install:
Search the Adom Wiki for the library component "W25Q128JVSIQ" (slug: w25q128jvsiq) at https://wiki-ufypy5dpx93o.adom.cloud/wiki/libraries/w25q128jvsiq. Pull down the KiCad symbol, footprint, and 3D model files from the wiki page's assets. Install them into my current KiCad project and register in sym-lib-table and fp-lib-table. If the page has a datasheet URL, save that too.
The W25Q128JVSIQ is a 128Mbit (16MB) serial NOR Flash memory from Winbond. SPI interface at up to 133MHz. Used for code storage, data logging, and firmware updates in embedded systems.
Electrical Specifications
Capacity: 128Mbit (16MB)
Interface: SPI (up to 133MHz)
Erase Cycles: 100,000
Data Retention: 20 years
Package: SOIC-8
Pin Configuration
Package: SOIC-8
Pin 1: CS — Chip select (active low)
Pin 2: DO — Data out (MISO)
Pin 3: WP — Write protect (active low)
Pin 4: GND — Ground
Pin 5: DI — Data in (MOSI)
Pin 6: CLK — SPI clock
Pin 7: HOLD — Hold (active low)
Pin 8: VCC — Supply voltage (2.7V-3.6V)
Sub-Skills
?
What are Sub-Skills?
Sub-skills are community-contributed AI skill extensions for this component.
They teach AI assistants about specific tools, configurators, or workflows.
Examples:
A manufacturer’s configuration tool for a motor controller
A community-written design guide for an amplifier circuit
An automated test/validation script for a sensor module
How to add one: Click Add Sub-Skill, provide the URL
to your skill and a brief description. Submissions are reviewed by the Adom team
before going live.
No sub-skills yet. Be the first to contribute one!