Paste this into Claude Code (VS Code panel, Adom editor, or terminal) to install:
Search the Adom Wiki for the library component "MAX485" (slug: max485) at https://wiki-ufypy5dpx93o.adom.cloud/wiki/libraries/max485. Pull down the KiCad symbol, footprint, and 3D model files from the wiki page's assets. Install them into my current KiCad project and register in sym-lib-table and fp-lib-table. If the page has a datasheet URL, save that too.
The MAX485 is a low-power RS-485/RS-422 transceiver from Maxim. Half-duplex operation with up to 2.5Mbps data rate. Used for long-distance serial communication in industrial and building automation networks.
Electrical Specifications
Supply Voltage: 5V
Data Rate: 2.5Mbps
Bus Nodes: Up to 32
Driver Output: ±1.5V min
Package: DIP-8 / SOIC-8
Pin Configuration
Package: DIP-8
Pin 1: RO — Receiver output
Pin 2: RE — Receiver enable (active low)
Pin 3: DE — Driver enable (active high)
Pin 4: DI — Driver input
Pin 5: GND — Ground
Pin 6: A — RS-485 bus A (non-inverting)
Pin 7: B — RS-485 bus B (inverting)
Pin 8: VCC — Supply voltage (5V)
Sub-Skills
?
What are Sub-Skills?
Sub-skills are community-contributed AI skill extensions for this component.
They teach AI assistants about specific tools, configurators, or workflows.
Examples:
A manufacturer’s configuration tool for a motor controller
A community-written design guide for an amplifier circuit
An automated test/validation script for a sensor module
How to add one: Click Add Sub-Skill, provide the URL
to your skill and a brief description. Submissions are reviewed by the Adom team
before going live.
No sub-skills yet. Be the first to contribute one!