Paste this into Claude Code (VS Code panel, Adom editor, or terminal) to install:
Search the Adom Wiki for the library component "LSM6DSO" (slug: lsm6dso) at https://wiki-ufypy5dpx93o.adom.cloud/wiki/libraries/lsm6dso. Pull down the KiCad symbol, footprint, and 3D model files from the wiki page's assets. Install them into my current KiCad project and register in sym-lib-table and fp-lib-table. If the page has a datasheet URL, save that too.
The LSM6DSO is a 6-axis IMU from STMicroelectronics with machine learning core. Features ultra-low power consumption, embedded FIFO, and programmable finite state machine for edge AI applications.
Electrical Specifications
Gyro: ±125/250/500/1000/2000 °/s
Accel: ±2/4/8/16 g
ODR: Up to 6.66kHz
Interface: I2C / SPI
Supply: 1.71V-3.6V
Package: LGA-14
Pin Configuration
Package: LGA-14
Pin 1: SDO/SA0 — SPI data out / I2C addr bit
Pin 2: SDX — Aux SPI data
Pin 3: SCX — Aux SPI clock
Pin 4: INT1 — Interrupt output 1
Pin 5: VDDIO — I/O supply (1.62V-3.6V)
Pin 6: GND — Ground
Pin 7: GND — Ground
Pin 8: VDD — Supply voltage (1.71V-3.6V)
Pin 9: INT2 — Interrupt output 2
Pin 10: NC — No connection
Pin 11: NC — No connection
Pin 12: CS — SPI chip select
Pin 13: SCL — I2C clock / SPI clock
Pin 14: SDA — I2C data / SPI data in
Sub-Skills
?
What are Sub-Skills?
Sub-skills are community-contributed AI skill extensions for this component.
They teach AI assistants about specific tools, configurators, or workflows.
Examples:
A manufacturer’s configuration tool for a motor controller
A community-written design guide for an amplifier circuit
An automated test/validation script for a sensor module
How to add one: Click Add Sub-Skill, provide the URL
to your skill and a brief description. Submissions are reviewed by the Adom team
before going live.
No sub-skills yet. Be the first to contribute one!