CMOS voltage converter, positive to negative, DIP-8
⚡Install this component
Paste this into Claude Code (VS Code panel, Adom editor, or terminal) to install:
Search the Adom Wiki for the library component "ICL7660" (slug: icl7660) at https://wiki-ufypy5dpx93o.adom.cloud/wiki/libraries/icl7660. Pull down the KiCad symbol, footprint, and 3D model files from the wiki page's assets. Install them into my current KiCad project and register in sym-lib-table and fp-lib-table. If the page has a datasheet URL, save that too.
ICL7660 — CMOS voltage converter, positive to negative, DIP-8
Manufacturer: Renesas
Package: DIP-8
Description
The ICL7660 is a charge pump voltage converter that inverts positive voltage to negative. Converts +1.5V to +10V input to -1.5V to -10V output. Used to generate negative rails for op-amps from single supplies.
Electrical Specifications
Input Voltage: 1.5V-10V
Output: Inverted voltage (-VIN)
Conversion Efficiency: 99.9%
Frequency: 10kHz
Package: DIP-8
Pin Configuration
Package: DIP-8
Pin 1: NC — No connection
Pin 2: CAP+ — Capacitor positive
Pin 3: GND — Ground
Pin 4: CAP- — Capacitor negative
Pin 5: VOUT — Negative output voltage
Pin 6: LV — Low voltage (boost mode)
Pin 7: OSC — Oscillator frequency control
Pin 8: V+ — Positive supply (1.5V-10V)
Sub-Skills
?
What are Sub-Skills?
Sub-skills are community-contributed AI skill extensions for this component.
They teach AI assistants about specific tools, configurators, or workflows.
Examples:
A manufacturer’s configuration tool for a motor controller
A community-written design guide for an amplifier circuit
An automated test/validation script for a sensor module
How to add one: Click Add Sub-Skill, provide the URL
to your skill and a brief description. Submissions are reviewed by the Adom team
before going live.
No sub-skills yet. Be the first to contribute one!