Temperature, humidity, and pressure sensor, I2C/SPI, LGA-8
⚡Install this component
Paste this into Claude Code (VS Code panel, Adom editor, or terminal) to install:
Search the Adom Wiki for the library component "BME280" (slug: bme280) at https://wiki-ufypy5dpx93o.adom.cloud/wiki/libraries/bme280. Pull down the KiCad symbol, footprint, and 3D model files from the wiki page's assets. Install them into my current KiCad project and register in sym-lib-table and fp-lib-table. If the page has a datasheet URL, save that too.
BME280 — Temperature, humidity, and pressure sensor, I2C/SPI, LGA-8
Manufacturer: Bosch Sensortec
Package: LGA-8
Description
The BME280 is a combined temperature, humidity, and barometric pressure sensor from Bosch. I2C and SPI interfaces. Measures pressure 300-1100 hPa, temperature -40 to 85C, and humidity 0-100%.
Electrical Specifications
Temperature: -40°C to +85°C (±1°C)
Humidity: 0-100% RH (±3%)
Pressure: 300-1100 hPa (±1 hPa)
Interface: I2C / SPI
Package: LGA-8 (2.5x2.5mm)
Pin Configuration
Package: LGA-8
Pin 1: GND — Ground
Pin 2: CSB — SPI chip select
Pin 3: SDI — SPI data in / I2C SDA
Pin 4: SCK — SPI clock / I2C SCL
Pin 5: SDO — SPI data out / I2C addr select
Pin 6: VDDIO — I/O supply voltage (1.2V-3.6V)
Pin 7: GND — Ground
Pin 8: VDD — Supply voltage (1.71V-3.6V)
Sub-Skills
?
What are Sub-Skills?
Sub-skills are community-contributed AI skill extensions for this component.
They teach AI assistants about specific tools, configurators, or workflows.
Examples:
A manufacturer’s configuration tool for a motor controller
A community-written design guide for an amplifier circuit
An automated test/validation script for a sensor module
How to add one: Click Add Sub-Skill, provide the URL
to your skill and a brief description. Submissions are reviewed by the Adom team
before going live.
No sub-skills yet. Be the first to contribute one!