Paste this into Claude Code (VS Code panel, Adom editor, or terminal) to install:
Search the Adom Wiki for the library component "AT24C256" (slug: at24c256) at https://wiki-ufypy5dpx93o.adom.cloud/wiki/libraries/at24c256. Pull down the KiCad symbol, footprint, and 3D model files from the wiki page's assets. Install them into my current KiCad project and register in sym-lib-table and fp-lib-table. If the page has a datasheet URL, save that too.
The AT24C256 is a 256Kbit (32KB) serial EEPROM with I2C interface from Microchip. Features 1 million write cycles, 100-year data retention, and page write capability for storing configuration and calibration data.
Electrical Specifications
Capacity: 256Kbit (32KB)
Interface: I2C (1MHz)
Endurance: 1,000,000 cycles
Data Retention: 100 years
Package: SOIC-8
Pin Configuration
Package: SOIC-8
Pin 1: A0 — Address select bit 0
Pin 2: A1 — Address select bit 1
Pin 3: A2 — Address select bit 2
Pin 4: GND — Ground
Pin 5: SDA — I2C data
Pin 6: SCL — I2C clock
Pin 7: WP — Write protect (active high)
Pin 8: VCC — Supply voltage (1.7V-5.5V)
Sub-Skills
?
What are Sub-Skills?
Sub-skills are community-contributed AI skill extensions for this component.
They teach AI assistants about specific tools, configurators, or workflows.
Examples:
A manufacturer’s configuration tool for a motor controller
A community-written design guide for an amplifier circuit
An automated test/validation script for a sensor module
How to add one: Click Add Sub-Skill, provide the URL
to your skill and a brief description. Submissions are reviewed by the Adom team
before going live.
No sub-skills yet. Be the first to contribute one!